| 9/15/02 | after cutting the caddy in half and pressure washing the drivetrain. |
| 1/5/03 | Pictures of a 75 pinto that I cut up and got the front end out. |
| 2/2/03 | I got the last things out of the Pinto I might need so now it is time to have fun with the car before it goes to the junkyard. |
| 2/20/03 | I have to fix my camera it is starting to mess up, but here are 2 pictures of my frame I took as we started on putting the lower rails together. |
| 2/21/03 | I have my camera fixed and here are a few pictures of the frame that show some more detail. next week it should start coming together a lot faster. |
| 2/25/03 | Here is the bottom of the frame finished and located properly. |
| 3/4/03 | The body is temporarily placed on the frame to see how it is coming. |
| 3/7/03 | Pictures of the roll bar and more frame braces. |
| 3/17/03 | The rotors are mounted and wheels put on. |
| 3/19/03 | All the main frame rails are now done. |
| 3/21/03 | The frame is now complete and only needing a few details to finish it. |
| 3/25/03 | A few pictures of the new transmission mount and other things. |
| 4/4/03 | The car is finally home. |
| 4/6/03 | Rear suspension is assembled and some paint on the frame rails to protect it. |
| 4/12/03 | New Floorpan installed and test fitting body again. |
| 4/21/03 | front brakes installed, pedals installed, rear springs sort of installed. |
| 4/27/03 | gas tank designed and test fitting new back wheels and brakes. |
| 5/2/03 | Throttle cable and shifter cable installed and working. |
| 5/4/03 | Gas tank cut out and ready to weld. |
| 5/11/03 | Brake lines and radiator pipe installed. |
| 5/24/03 | Rear suspension finally put together and working right. |
| 5/28/03 | Gas tank put together and test fitted in place. |
| 6/1/03 | Gas tank, trans cooler, and body back on. |
| 6/2/03 | Radiator and battery tray mounted in the front. |
| 6/5/03 | Bunch of random parts bolted back on, and the dashboard is in. |
| 6/6/03 | Pulled the car out from under carport and cleaned it up for the show, Still no starter so it doesn't run. |
| 6/7/03 | It started!!!!!!! no pics though it looks the same as before it just smokes a lot now :) |
| 6/8/03 | Pics from the town of Man car show. |
| 6/14/03 | Trunk mounted, new roll bar and some other details. |
| 7/11/03 | Installing Fuel Injection. |
| 7/12/03 | fuel lines ran and converting distributor to 7 wire computer control. |
| 7/14/03 | Running good now with fuel injection and computer controlled ignition. |
| 7/23/03 | Few engine details, brakes fixed, and other little things. |
| 7/28/03 | Started sorting out the mess of wiring in the car. |
| 8/9/03 | Hydraulic throttle installed. |
| 8/22/03 | New computer in, minor repairs on engine and now it runs smooth. |
| 8/25/03 | Gas pedal finally fixed and working brake lights. |
| 9/7/03 | Figured out where and how to stick a muffler on it finally. |
| 9/10/03 | Muffler position figured out and ready for pipes. |
| 9/15/03 | Few random pics of the car ready to go get aligned and exhaust pipes. |
| 9/20/03 | Car is back from muffler shop. |
| 9/21/03 | Heat shields made up and trying to figure out where to put some fans in the back. |
| 9/26/03 | Vent cut behind license plate and fans mounted in the trunk. |
| 9/27/03 | started cleaning up the wiring and hooking everything up. |
| 10/10/03 | Rear firewall and seatbelts mounted. |
| 10/22/03 | Sort of a front firewall and some other random interior stuff. |
| 2/20/04 | Got the pedals figured out and ready to build a firewall now. |
| 2/21/04 | Cleaned out the foot area and made a cardboard template for a firewall. |
| 2/28/04 | aluminum firewall cut out. |
| 2/29/04 | Firewall mounted and mounting pedals for the absolutely last time. |
| 3/5/04 | Pedals mounted and brakes working again. |
| 2/26/05 | Tearing down the engine to do some work to it. |
| 2/27/05 | Cleaned up the lifter valley and stripped the heads down. |
| 3/4/05 | Trying to get one of the back tires off. |
| 3/6/05 | Stripped down the front of the engine and that tire is finally off :) |